Evident LogoOlympus Logo

BAT file to enable / disable Window10 update

BAT file to enable / disable Window10 update

The automatic update of Windows 10 can be enabled or disabled by using this BAT file.

About this BAT file

It is recommended to update OS to reduce the security risk when you connect the control unit with Windows 10 to network.  But when Microsoft Windows update for Windows 10 is enabled and it updates OS while using the FV3000 / FVMPE-RS system, the system may malfunction or stop operation due to changes in the control unit settings, increased load, or restart of the control unit.  Therefore, Windows update is set to be disabled as factory default. 
It is recommended to update OS by the procedure (A) or (B) described below.  Please manage and update OS according to the IT policy of the facility where this system is installed.

[Recommended update procedure]
(A) Keep Windows update disabled and update manually on a regular basis.
(B) Disable Windows update before starting system control software FV31S-SW, and enable Windows update again after terminating FV31S-SW to keep enabling Windows update while the system is not in use.
※Please use this BAT file when following the procedure (B).Windows update can be enabled / disabled by simple procedure using this BAT file.

Product to be applied

Fluoview FV3000 / FVMPE-RS (FV31S-SW: ver 2.6.1 or later, OS: Windows 10)

Download Procedure

  1. Press the [Download] button at the top right of the page.
    ※Download file name: Automatic_Update.zip
    ※Serial No.: Serial number is described on the software dongle key. (Refer to fig.)
    Serial No.
  2. When the [Download the file] dialog appears, press the [Save] button to download to the Desktop of the PC, etc
  3. The download file is compressed in ZIP format. Please extract the file.
    * To extract the compressed file, select the file on the explorer, right-click it to display the menu and select [Extract All].
    * The structure of the file after extraction is as follows.
    Automatic_Update.zip
    ├─Enabled_Automatic_Update.bat
    ├─Disabled_Automatic_Update.bat
    └─Automatic_Update_Manual_JPEN.pdf
  4. Copy the extracted files to somewhere in the control unit such as desktop.

Procedure to execute BAT file

Execute BAT file according to the manual "Automatic_Update_Manual_JPEN.pdf" in the zip file.
 

SpracheDateigrößeDownload
  Download

Sorry, this page is not
available in your country.

Sorry, this page is not available in your country