Evident LogoOlympus Logo

D21-CB (Ver. update

D21-CB (Ver. update

1. General

This software will update to the D21-CB Ver. Applicable D21-CB : To check serial number of D21-CB. If the bottom of the number is from [A0] to [A9], it is possible to update.


*In case the bottom of the serial is from [A0] to [A5], Model name is DP21-CB.

2. Software Modifications

Modification to below bugs when using the DP26 with DP21-SAL

  • The scale is displayed a half value of correct value in recorded images when capturing the image at 612 x 480 or 612 x 480 Binning resolution
  • There are some cases which the file format of the recorded image is changed to JPEG-HIGH when capturing the image at 1224 x 960 Binning or 612 x 480 Binning resolution live image

3. Installation Procedure

  1. Before installation
  2. Download
    • Please enter all the required (*) fields below in order to download the software.
    • Select the file you want to download from the right side of the page.
      * Download file name: [DP21SAL02010193.zip] (9,084KB)
      * Please download the [DP21SAL02010193.zip] file in your USB flash memory. (**)
      * Serial number is the alphanumeric characters indicated on your DP21-CU or DP26-CU. (See the figures below.) The number printed here is the serial number.
      **More 40MB free disk space require in the USB flash memory. If there are other files in the USB flash memory, please backup the files in advance.

      Olympus uses your personal information for the following purposes only:
      (1) to provide services and support regarding our products;
      (2) to provide information on our products and services; and
      (3) to gather statistical information regarding our product.
      We may disclose your personal information to our affiliates for the above purposes after obtaining their promise to observe above mentioned use covenant. Other than as provided above, we will not disclose your personal information to third parties except as required by laws and regulations.
  3. Update procedure
    • Melt the file "DP21SAL02010193.zip" which you saved in the USB flash memory in the route directory the 1st partition.
    • The following files are unarchiveed.
      • AppUpdate.bat(1KB)
      • DP21BSW_SETUP0201.exe(312KB)
      • DPEOSIf.dll(128KB)
      • DPUpdateTool.ini(1KB)
      • Folder¥DPE(12.3MB)
      • Folder¥Update(3.79MB)
    • About detail of update procedure, please see here.
  4. Verification of version
    • When the update is complete, place the cursor on [MAINTENANCE] in the MENU display and press the [OK] button.
    • Place the cursor on [VER…] and press the [OK] button.
    • If you see "Ver." in the DPE-BSW, the update is properly completed.
LanguageFile SizeDownload

Sorry, this page is not
available in your country.

Sorry, this page is not available in your country