Evident LogoOlympus Logo

cellSens V1.18 64bit Installer

cellSens V1.18 64bit Installer

This software is an updater of "cellSens V1.18 64bit".

Please be sure to update from the status where cellSens you have been using is installed according to procedures described below. (Note that the version must be cellSensV1.7 or later.)

Note:  Support for the following Olympus legacy hardware is discontinued in v1.18:  DP70, DP71, DP20, DP25, CC12Color View I, Color View II, Color View III, Color View IIIu, FView II, SC20.

Installation

  1. Before installation
    This software comes with "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading this software, please read OLYMPUS END-USER LICENCE AGREEMENT carefully. When downloading begins, it automatically assumes that you have agreed to terms and conditions in this "OLYMPUS END-USER LICENSE AGREEMENT". For operating configurations or license types, please refer to the page describing Product specifications. Please be sure to close all running software before downloading.
  2. Procedure to download files
    (1) Confirm that the version of your Windows OS is 64bit version. Select the file you want to download from the right side of the page.

    * Download file name: cellSensV0118_64bit.zip (2.30GB)

    (2) When an entry form appears, enter all required items.
    * The Serial Number means a "Serial Number " described in the main license card.
    cellSensv1.15_64_2-2
    (3) Press the [Send] button to start the download.
    Please understand that the downloading may take some time depending on your OS or network environment.
     
  3. Installation procedures
    (1) Decompress the downloaded zip file. (The file name differs depending on the version.)
    cellSensv1.13_64_3-1
    (2) Right-click on the icon to display the menu, and select [Extract all (T)…].
    cellSensv1.13_64_3-2
    (3) Select the folder to extract and click the [Extract] button.
    cellSensv1.13_64_3-3
    (4) When the file is decompressed, double-click "Setup.exe" of the folder to start Installer. When Installer starts, install the software according to instructions of Installer.  
    * Please refer to the installation manual for installation details. The installation manual is stored below the extracted folder. 
    \cellSensV0118_64bit\Shared\Manuals\cellSens\English\Install_cellSens_en.pdf 
    * You cannot install the software unless the user account is registered as "System Administrator". 
    If your account is registered as "Limited account", please ask "System Administrator" to change. (For user account registration, please refer to the user manual of your computer.) 
    * If you want to upgrade from cellSens V1.6 or earlier to cellSensV1.18, please contact Olympus for assistance. 

    * Please be sure to read OLYMPUS END-USER LICENCE AGREEMENT and Notice before downloading.
    * Before downloading, the form to enter required items appears.
LanguageFile SizeDownload
  Download

Sorry, this page is not
available in your country.

Sorry, this page is not available in your country