This is the updater for IX3-BSW to V01.04.09

1. Important notice for update

• If you are using Imaging software cellSens, it is necessary to update your cellSens software to V2.3 or later version.
  • Please confirm whether update for your cellSens is free of charge in the following webpage in advance.
    https://licenseinformation.olympus-sis.com/
  • If update is not free of charge, purchasing update license provides access to the latest version.
     
• It is necessary to update your IX83 firmware to IX83_FwUpdate_20170721.zip.
• Moving direction of the motorized stage IX3-SSU is depending on the IX3-BSW version as follows.
•         In case of turning the stage handle in clockwise direction
  • Ver. 01.02.01 or before           -->              X: right / Y: front
  • Ver. 01.03.01 or later               -->              X: right / Y: back
    In case of using Ver. 01.02.01 or before, moving direction of the IX3-SSU can be unified with this version up to the one of Ver. 01.03.01 or later.

2. Software Modifications

• Main modifications of the V01.04.09 from the V01.04.08

  • The auto focus (IX3-ZDC2) execution error which is happened when UPLSAPO60XS2 objective is selected on the software and/or touch panel controller was fixed.

3. Installation Procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the "OLYMPUS END-USER LICENSE AGREEMENT". When downloading begins, it automatically assumes that you agreed to this AGREEMENT.
      
2. Download
   • Select the file you want to download from the right side of the page. 
     * Download file name: 「installer_IX3-BSW_010409.zip」(7.4MB)
     * Serial number is the alphanumeric characters indicated on your touch panel controller I3-TPC (See the figures below.). The number printed here is the serial number.
     
     Please input the serial number of I3-TPC.
     
      
3. Installation
   Installation manual is contained in the downloaded file written in above “2. Download” section. Please follow the procedure accordingly.

4. Verification of version

Tap the [System Setting] button on the [MENU] screen of the touch panel controller to display the [System Setting] screen. Check the version displayed.