This program solves software bugs in following software:

• cellSens FV v. 3.1.1
• cellSens FV Desktop v. 3.1.1
• cellSens FV Viewer v. 3.1.1

This program cannot be used on any software or version except for the ones mentioned above.

To confirm which version of cellSens FV software you have, follow these steps:

1) Launch cellSens FV software.

2) Select “About cellSens FV” from the Help menu.

3) Confirm your version in the “About cellSens FV” window.

Please confirm in the “About cellSens FV window” that the current version is 3.1.1.67. If your version is different, this bug fixing program will not work.

Changes and Corrections

Major bugs resolved:

• Some frames of a large volume image may not be displayed properly.
• Ratio/Concentration analysis results may not be correct.
• The progress bar may not display properly during TruSight processing.

Download procedure

1) Select the file you want to download from the right side of the page.

• Download file name: patch_3.1.1_1.zip (60.2 MB)

2) Enter the required information to download the file.

• Serial no: please input the serial number on the back of the touch panel controller （TPC) of the FLUOVIEW microscope system.

Front (left) and back (right) of the touch panel controller

Serial number for the BX63LF (alphanumeric string of 7 characters)

Installation procedure

1) Close all software applications.

2) Save the downloaded file in the appropriate location (desktop, etc.) on the PC.

3) Decompress the downloaded file.

4) Execute “patch_all.cmd” by right clicking and selecting “Run as administrator.”

5) After installation is finished without any error message, press any key to exit.

* If the message “FV40S-SW 3.1.1.67 not found!” is displayed, the software version is not v. 3.1.1.
Please install the bug fixing program after updating the software to v. 3.1.1.

6) cellSens software automatically starts in Desktop/Viewer mode to load the changes.
Select “About cellSens FV” from the Help menu after start up.

7) Confirm “Patch version” in the “About cellSens FV” window.
If the Patch version is “1,” the bug fixing program has been successfully installed.

8) Exit the software to finish installation.