This modification program solves the problems of FV31S-DT Ver 2.6.1.

Object Product

• FV31S-DT Ver2.6.1.

If you use this software of other versions than above, install this modification program after updating it to ver2.6.1. Ver2.6.1 can be downloaded from here.

The problems to be solved by this modification software

• The layout which was created / saved by ver 2.6.1 may not be reproduced properly.

Installation Procedure

1. Before installation of this program
2. 1. Check whether your software is ver2.6.1.
      If you use previous version, please update the software to ver2.6.1. FV31S-DT ver2.4 is available from here.
       
3. Download
4. 1. Select the file you want to download from the right side of the page.
      ※ Download file name: "patch_2.6.1.243_1.zip" (15.2 MB) 
      ※ Serial No.: Serial number is described on the software dongle key. (Refer to fig.)
      
       
5. Installation
6. 1. Close all application software.
   2. Save patch_2.6.1.243_1.zip to anywhere of the PC, and unzip it.
   3. Run “patch_all.cmd” as administrator.
      
       
   4. After installation is finished without any error message, press any key to exit.
      
      *If you see the message of “ERROR! FV31S-SW 2.6.1.243 not found!”, the version of software is not Ver2.6.1.
      Please install this modification software after updating the software to ver2.6.1. You can download the ver2.6.1 software from here.
   5. FV31S-SW software will automatically start in DT mode to load the changes. Please exit the software when the software startup is completed.