Produktinformation

SZ2-STP Arm Used with Microscope for Equipment Mounting was shipped with the holding parts of the stereo microscope zoom body installed upside down. We would like to therefore offer replacement of the subject product free of charge.

We have found a problem with our incubation monitoring systems CM30 and CM20 in which the results of the Colony Count & Size analysis differ from the actual measured values. Please find information for affected products and software.

Due to a severe security vulnerability issue in a third-party component used in Evident Application Software, it is strongly advised to install the provided Service Update. This Service Update provides a version of the affected component that closes the vulnerability gap.

Microsoft ended their service support of Windows 8.1 in January 10, 2023. If you are currently using Windows 8.1 with any of our products, we recommend upgrading your PC to Windows 10.

Information for the users of FLUOVIEW FV3000 / FVMPE-RS equipped with controller unit with Windows10.

Due to a serious security vulnerability issue in a third-party component used in Olympus application software, it is strongly advised to install the provided Service Update. This Service Update provides a newer version of the affected component that closes the vulnerability gap.

Due to a severe security vulnerability issue in a third-party component used in Olympus application software, it is strongly advised to install the provided Service Update. This Service Update provides a version of the affected component that closes the vulnerability gap.

Both cellSens software and the DP2-SAL standalone microscope camera software have length measurement functions. Because the software is often shared between multiple users, if someone inadvertently changes the software’s measurement setting, you may not get the correct length measurement results.

Microsoft will end their service support of Windows 7 in January of 2020. If you are currently using Windows 7 with any of our products, we recommend upgrading your PC to Windows 10.

Regarding our product of Bräce-köhler compensator ‘U-CBR1 / U-CBR2’, it was identified that the orientation setting of Gamma axis (Gamma axis : direction of slow optical vibration) was different from the indication of the products when shipping. We would therefore like to replace the applicable products free of charge.

Dear Valued Olympus Customer, Thank you for your continued business with Olympus Corporation. As part of our efforts for continuous improvement and the safe use and operation of our products, we would like to inform you of the following announcement related to your Laser devices for biological microscopes.