Evident LogoOlympus Logo

DP80 FirmwareVer. 01.02 update

1. Precautions

  • Do not turn off the power of PC during update. And be careful not to come out camera cable and power code during update.
  • It takes about 2 minutes to complete to update.
  • Shut down all active applications before update.
  • Disable all power saving setting like screensaver before update.
  • Reboot the computer after update to renew to the latest firmware.

2. DP80 firmware update procedure

[Step 1] Download :"DP80_FUv0102_64bit.exe" and save it to a folder in your PC which is used with DP80.

[Step 2]
Double click "DP80_FUv0102_64bit.exe".

[Step 3]
Read following license agreement and click “ Yes” button.

DP80FW-SU_2_step3

[Step 4]
Note in following dialog and click "Next".

DP80FW-SU_2_step4

[Step 5]
Click "OK" in following dialog.

2_step5

[Step 6]

DP_Series/DP80FW-SU_2_step6-1

Click "update" in following dialog. And then the update is started.

Wait for about 1 minute. You can check the update progress in following dialog.

DP80FW-SU_2_step6-2

[Step 7]
When displaying following dialog, the update for camera head firmware is completed.
After clicking "OK", next the update for PCIe I/Fborad firmware will be started.

DP80FW-SU_2_step7

[Step 8]
Note in following dialog and click "Next".

DP80FW-SU_2_step8

[Step 9]
Click "OK" in following dialog.

DP80FW-SU_2_step9

[Step 10]
Click "start" in following dialog. And then the update is started.

DP80FW-SU_2_step10-1

Wait for about 1 minute. You can check the update progress in following dialog.

DP80FW-SU_2_step10-2

[Step 11]
When displaying following dialog, the update for PCIe I/F board firmware is completed.
Click "OK" and reboot the computer.

DP80FW-SU_2_step11

3. After update (Update confirmation)

After reboot the computer, double click the file "DP80_FUv0102_64bit.exe" again. After procedure from [Step 2] to [Step 5], if the following dialog is display, the update for firmware of camera head is successful.
Click "OK" button.

DP80FW-SU_3-1

Next , after from[Step 8] to [Step 9], if the following dialog is display, the update for firmware of PCIe I/F board is successful

Click "OK" button to close update program.

DP80FW-SU_3-2

4. Other cautions

※If the following dialog is displayed,  DP80 camera head is not connected. Connect DP80 camera head and then update.

DP80FW-SU_4-1

※ If the following dialog is displayed, the different camera head is connected. Connect DP80 camera head and then update.

DP80FW-SU_4-2

Sorry, this page is not
available in your country.

Lo sentimos, la página solicitada no se encuentra disponible en su país.