DP71 Device driver for Windows Vista 64-bit, MALAD0403

Before Installation

The software cannot be installed unless the user account is registered as “Computer administrator”. If the user account is registered as a “Restricted account”, change it to the “Computer administrator” account. (For the user account registration, refer to the instruction manual for your PC.)

1. Ensure that the PCI interface board is installed in the PC.
2. Before proceeding to installation, close all running applications.

Installing the Software (Windows Vista)

1. Double click on the [MALAD0403x64.exe] which was downloaded. The following folder is created in the same folder of [MALAD0403x64.exe].
   MALAD0403x64
    
2. Click on the [Start] button. When the [Start] menu is displayed, click on the [Control Panel].
   
    
3. When the [Control Panel] window is displayed, click on the [System and Maintenance].
   
   It the [Control Panel] display is of the “Classic View” type, double click on the [System] icon and go to step 5) below.
    
4. Click on the [System].
   
    
5. Click on the [Device Manager] in the [Tasks].
   
    
6. When the [User Account Control] appears, click on the [Continue] button.
   
    
7. Double click on the [Other devices].
   
    
8. Right-click on the [Other PCI Bridge Device], then select the [Update Driver Software…]
   
    
9. Click on the [Browse my computer for driver software].
   
    
10. Select the folder which is extracted at 1), and then click on the [Next] button.
    
     
11. When the [Windows Security] dialog box appears, click on the [Install] button.
    
    
     
12. When installation of the device driver finished, click on [Close] button.
    
     
13. Double click on the [Malad Device] in the [Device Manager].
    
     
14. Right-click on the [Malad Device], and then select the [Properties].
    
     
15. Click on the [Driver] tab. If the [Driver Version] is 4.3.4.1, installation is finished correctly.